Guide to Accurate Door Hinge Measurements for Flawless Installation

Imagine receiving custom-made door panels only to discover the hinge holes don't align properly, resulting in wasted time, money, and compromised aesthetics. This frustrating scenario can be entirely avoided by mastering proper hinge measurement techniques.

Before beginning, gather these essential tools:

• High-precision tape measure: Select one with clear markings for accurate results. Avoid cloth tapes or easily deformed measuring tools.
• Pencil: Use medium-hardness pencils that make clear marks without leaving permanent traces.

For doors with two hinges:

• Top hinge: Measure vertically from the door's top edge to the center of the top hinge hole.
• Bottom hinge: Measure vertically from the door's bottom edge to the center of the bottom hinge hole.

Important: Measure each door individually as hinge positions may vary slightly even within the same production batch.

For taller or heavier doors requiring three hinges:

• Measure top and bottom hinges as above
• Middle hinge: Measure from the top edge to the center hinge hole. If centered vertically, simply mark as "center."

For extra-tall doors (over 1700mm):

• Measure two top hinges from the upper edge
• Measure two bottom hinges from the lower edge

Most hinges feature:

• 35mm diameter holes
• 22.5mm distance from hole center to door edge

Special situations may require:

• Replacement of non-standard older hinges
• Unique design specifications

Note: Consult manufacturers or professionals for custom hole placement to ensure safety and functionality.

• Verify door verticality before measuring
• Take multiple measurements and average results
• Make clear, visible markings
• Account for door thickness when selecting hinges
• Always review manufacturer installation guides

For standard doors:

• Top hinge: 100mm from top edge
• Bottom hinge: 100mm from bottom edge
• Middle hinge (3-hinge): Vertical center or as needed
• Four-hinge doors: Additional hinges at 750mm from edges

Important: These are general guidelines - always verify against actual door dimensions.

Solutions for common challenges:

• Warped frames: Use levels for correction before measuring
• Uneven walls: Employ shims or filler for proper alignment
• Door replacements: Carefully examine existing hinge placements

Accurate hinge measurements form the foundation for properly functioning doors and enhanced home aesthetics. By following these professional techniques and attention to detail, homeowners can achieve flawless installations that stand the test of time.